苛化提纯盐湖锂矿回收含氟碳酸锂的研究

主要论述了一种提纯盐湖锂矿和回收含氟碳酸锂的方法。工艺流程：盐湖锂矿（含氟碳酸锂）通过一次水洗涤除去其中所含的大部分可溶性杂质后,按一定配比将其投入到石灰乳料浆中加热到90~95 ℃反应4 h,过滤后得到氢氧化锂溶液,将氢氧化锂溶液在100~120 ℃下进行加压浓缩4 h精制得到钙镁离子和硅含量较低的氢氧化锂溶液;向精制后的氢氧化锂溶液中通入食品级二氧化碳沉锂得到工业级碳酸锂,或继续浓缩制备氢氧化锂;用以上工艺生产得到的工业级碳酸锂通过二次碳化、阳离子交换树脂除去钙镁离子、重结晶可得到硅含量为10×10^-6以内的高纯碳酸锂,或浓缩得到钙含量为5×10^-6、镁含量为2×10^-6以内的单水氢氧化锂。     

Distributed Functional Observer-based Event-triggered Containment Control of Multi-agent Systems

This paper studies the containment control problem of linear multi-agent systems (MASs) with a directed graph, where the states of the followers will asymp     

新型卡板式外径千分表的设计应用

针对机车牵引电机转轴磨削测量中,对转轴轴承位尺寸超差的原因进行分析,设计制作机车牵引电机转轴新型卡板式外径千分表(实用新型:ZL201420477030.7)。实际应用表明,新型卡板式外径千分表保证了牵引电机转轴轴承位的磨削尺寸,避免了转轴轴承位尺寸超差现象,解决了机车牵引电机转轴轴承位磨削测量的工艺、质量问题。     

时空四维动态分析在采场及生产接续管理中的应用

时空四维动态分析管理理念是通过对矿井采场布局情况的精准分析,结合采场空间布置和时间布局,找出干涉点、影响点、关键点和突出问题,对生产布局情况进行动态循环调整,保障采场接续正常,为矿井长远稳定发展提供理论基础。     

Tribological and corrosion behaviors of fluorocarbon coating reinforced with sodium iron titanate platelets and whiskers

A series of sodium iron titanate (NFTO)–fluorocarbon composite coatings have been prepared with the liquid-phase blending method. The effects of two types of NFTO, NFTO platelets, and NFTO whiskers, on the tribological and corrosion behaviors of the composite coatings, are systematically studied. The results show that the addition of NFTO can significantly enhance the friction-reducing and wear resistance performances of the fluorocarbon coating. Under dry sliding, the minimum specific wear rate is 1.67 × 10⁻⁴ mm³/Nm for the platelet-filled composite coatings and 1.15 × 10⁻⁴ mm³/Nm for the whisker-filled composite coatings, respectively, showing a decrease of 83.5 and 88.6% than that of pure coating. Under a simulated seawater environment, the minimum specific wear rate is 5.44 × 10⁻⁵ mm³/Nm for the platelet-filled composite coatings and 0.84 × 10⁻⁵ mm³/Nm for the whisker-filled composite coatings, respectively, showing a decrease of 90.5 and 98.5% than that of pure coating. The morphologies of worn surfaces, wear debris, and transfer films are analyzed, and the corresponding wear resistance mechanisms are discussed. The electrochemical impedance spectroscopy certifies a remarkably improved corrosion resistance of the composite coatings which have been immersed in 3.5 wt % NaCl solution for 30 days. The composite coating reinforced with 7.5 wt % platelets shows the highest resistance of 256.3 × 10⁶ Ω·cm², approximately two orders of magnitude higher than that of pure coating. © 2020 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48936.     

Study on chaotic oscillator-based algorithm for weak GLONASS signal acquisition

According to the characteristics of the chaotic oscillator in detecting weak signals, an algorithm based on Duffing chaotic oscillator array was proposed for acquisition of weak GLONASS signals. By means of GLONASS intermediate frequency and Duffing chaotic oscillator models, Lyapunov exponent is adopted to judge the critical condition of phase track and decide whether GLONASS signals exist or not by the change of the critical condition, and numeric iteration procedure is used to calculate the exponent. Finally, the performance of algorithm is simulated using GLONASS intermediate frequency data. The results indicate that acquisition algorithm can satisfy the need of object positioning in low signal-to-noise ratio environment.     

Electron Paramagnetic Resonance and Magnetic Circular Dichroism Spectra of the Nitrogenase M Cluster Precursor Suggest Sulfur Migration upon Oxidation: A Proposal for Substrate and Inhibitor Binding

The active site of the nitrogen-fixing enzyme Mo-nitrogenase is the M cluster ([MoFe₇S₉C ⋅ R-homocitrate]), also known as the FeMo cofactor or FeMoco. The biosynthesis of this highly complex metallocluster involves a series of proteins. Among them, NifB, a radical-SAM enzyme, is instrumental in the assembly of the L cluster ([Fe₈S₉C]), a precursor and all-iron core of the M cluster. In the absence of sulfite, NifB assembles a precursor form of the L cluster called the L* cluster ([Fe₈S₈C]), which lacks the final ninth sulfur. EPR and MCD spectroscopies are used to probe the electronic structures of the paramagnetic, oxidized forms of both the L and L* clusters, labeled L^Ox and [ L* ] ^Ox . This study shows that both L^Ox and [ L* ] ^Ox have nearly identical EPR and MCD spectra, thus suggesting that the two clusters have identical structures upon oxidation; in other words, a sulfur migrates away from L^Ox following oxidation, thereby rendering the cluster identical to [ L* ] ^Ox . It is proposed that a similar migration could occur to the M cluster upon oxidation, and that this is an instrumental part of both M cluster formation and nitrogenase substrate/inhibitor binding.     

Preparation and properties of chitosan/acidified attapulgite composite proton exchange membranes for fuel cell applications

A composite proton exchange membrane chitosan (CS)/attapulgite (ATP) was prepared with the organic–inorganic compounding of ATP and CS. The composite membranes were characterized by scanning electron microscope (SEM), X-ray diffraction (XRD), and fourier transform infrared spectroscopy (FTIR). The mechanical properties, thermal stability, water uptake, and proton conductivity of the composite membranes were fully investigated. The composite membranes exhibited an enhanced mechanical property, dimensional and thermal stability compared to CS membrane, owing to the interface interaction between ATP and CS. The maximum tensile strength of 53.1 MPa and decomposition temperature of 223.4°C was obtained, respectively. More importantly, the proton conductivity of the composite membrane is also enhanced, the composite membrane with 4 wt% ATP content (CS/ATP-4) exhibited the highest proton conductivity of 26.2 mS cm⁻¹ at 80°C with 100% relative humidity, which is 25.1% higher than pure CS membrane. These results may explore a simple and green strategy to prepare CS-based PEMs, which have a great potential in the application of proton exchange membrane fuel cells.